Rocker Switch 535B HEAD LIGHTS dual LED blue ON-OFF
As low as £6.90
12V 20A / 24V 10A Carling/ARB/Narva type Rocker Switch with dual LED BLUE ON-OFF
In stock
SKU
SW535B
12V 20A / 24V 10A ON - OFF Rocker Switch
This high quality Rocker switch from AOB is a single throw ON - OFF switch designed to operate your accessories. It has a face surface size of 49.5mm x 24.5mm and uses a standard din size mounting hole of 37.5mm x 21.2mm. This is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.
All symbols are printed directly onto the switch face using modern high tech inks and printers to ensure long image life. we do not use stickers which will wear off in a very short time.
The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.
AOBSW500 series
Rear picture showing terminals. Wiring diagram will be supplied with switch purchase. Independent wiring circuit to connect dash lights
AOBSW500 series Illumination
When switch is turned on the top light (picture 1) illuminates.
The bottom light (bar) has an Independent wiring circuit to connect to your dash lights. You can connect it to the dash light circuit or leave off, your choice.
(this is a sample image with the Zombie light logo)
| Switch_Cover_Type | Carling type |
|---|---|
| Switch_Type | ON-OFF |
| Switch Logo | HEAD LIGHTS 35 |
| Color | BLUE BLUE |
| Material | Plastic |
| Switch_Layout | VERTICAL |
| Electric_ Rating | 12V 20A / 24V 10A |
| Lights | Dual backlit LED lights. Upper light is ON when the switch is pressed UP. Lower light can be wired to separate dash light circuit. |
| MountingHole_Size | 37.5mm x 21.2mm |
| Waterproof_Rating | IP66 |
| Suitable To | Universal |
Write Your Own Review