Thank you for your visit!

Please be aware that our staff will be away from 2024-03-28 to 2024-04-12

All orders purchased during this time will not be shipped until the 15th of April 2024

Wish you a great Easter Holiday !

 Toyota Push Switch BEACON 8B51G dual LED green ON-OFF

Toyota Push Switch BEACON 8B51G dual LED green ON-OFF

 Toyota Push Switch BEACON 8B51O dual LED amber ON-OFF

Toyota Push Switch BEACON 8B51O dual LED amber ON-OFF

Toyota Push Switch BEACON 8B51GR dual LED green red ON-OFF

£6.90
12V 3A Laser etched ON-OFF Toyota OEM Replacement Push Switch 8B51GR with dual LED lights in green red and BEACON legend

In stock

SKU
SW8B51GR
Customize Toyota Push Switch BEACON 8B51GR dual LED green red ON-OFF
1 x BEACON   + £0.00
1 x LED GREEN RED   + £0.00
1 x WIRING PLUG   + £0.00

* Required Fields

Your Customization
 Toyota Push Switch BEACON 8B51GR dual LED green red ON-OFF
Toyota Push Switch BEACON 8B51GR dual LED green red ON-OFF

In stock

£6.90

Summary

    12 Volt 3amp ON - OFF TOYOTA PUSH Switch
    Twin L.E.D Lights

    This Switch Suits the following models ONLY:

    Toyota Prado 120 Series
    2003 - 2009
    Toyota Landcruiser 100 Series
    1998 - 2007
    Toyota Landcruiser 79 Series
    New Model
    Toyota FJ Cruiser
    2010 - 2015
    Toyota Hilux D-4D, HL2, HL3, INVINCIBLE, MK111
    2005 - 2016
    Toyota HiAce
    2005 - 2015

    Please check the hole size before purchase

     


     

    This 12 volt push switch from AOB is a single throw ON - OFF switch designed to operate your 12 volt accessories. It has a face surface size of 39 mm x 21 mm and uses the original mounting hole of the vehicle.

    This Switch is an aftermarket switch that locks into your existing panel super easy to install in less than 10 min's.

    • Single Pole Single Throw ON - OFF PUSH switch
    • Black hard surface
    • Laser etched Legend
    • Single upper L.E.D light in GREEN
    • Single lower L.E.D light in RED
    • Upper light is ON when the switch is pressed IN
    • Lower light can be wired to separate dash light circuit
    • Rated at 3Amp 12V
    • Wire Plug and wiring diagram supplied with switch

    All symbols are Laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life.

    The switch is an electronic switch rated at 3amp's.Therefore in ALL cases the accessory MUST be wired through a fused relay.

     

    Example of Dash Panel with AOBSW800 series Push Switches

    Panel shown from 2010 Toyota. This Panel is mounted on the left side of the steering wheel.

    AOBSW800 series

    Rear picture showing terminals and wiring harness supplied with switch

    Wiring diagram will be supplied with switch purchase.

    AOBSW800 series Illumination

    When switch is turned on the top light (picture 1) illuminates.

    The bottom light (bar) has an Independent wiring circuit to connect to your dash lights. You can connect it to the dash light circuit or leave off, your choice.

    (this is a sample image with the LED LIGHT BAR logo)

    More Information
    Switch Logo BEACON B51
    Switch_Type ON-OFF
    Switch_Layout VERTICAL
    Toyota_Model FJ Cruiser 2010 - 2015, HiAce 2005 - 2015, Hilux D-4D 2005 - 2016, Hilux HL2 HL3 2005 - 2016, Hilux INVINCIBLE 2005 - 2016, Hilux MK111 2005 - 2016, Landcruiser 100s 1998 - 2007, Landcruiser 79s New Model, Prado 120s 2003 - 2009
    Material Plastic
    Electric_ Rating 12V 3A
    Color GREEN RED
    Lights Dual backlit LED lights. Upper light is ON when the switch is pressed IN. Lower light can be wired to separate dash light circuit.
    Write Your Own Review
    You're reviewing: Toyota Push Switch BEACON 8B51GR dual LED green red ON-OFF